One of the primary reasons many homeowners install marble countertops in their homes is because they love their shiny, polished look. Unfortunately, the countertops lose their shiny look due to constant use and poor care.

When the countertops lose their original shine, many homeowners have the impression that the only way they can have shiny countertops again is to replace the dull ones with new ones.

Fortunately, this isn’t the case. This is because there are ways you can revive dull countertops. Some of the things you can do to achieve this include:

Clean the countertops

Sometimes all you need to do is to clean the countertops. And the good thing is that it doesn’t have to be complicated.

Start spraying the countertops with a mild stone cleaner, then wipe it off with a soft dry cloth. If you don’t have the budget or can’t find a commercial stone cleaner, you can always use mild dishwashing soap on a damp piece of cloth.

You should apply the soap on the cloth, then use the cloth to wipe and clean the marble.

When cleaning the surfaces, do not let the soap stay on them for too long, as it can cause stains. The best way to go about it is to rinse the soap off with water as soon as you are done cleaning, then wipe the surfaces dry after that.

If the above cleaning method doesn’t work, use one part of hydrogen peroxide and two parts of water. Take care not to use too much hydrogen peroxide, as you can easily damage the surfaces.

Sand the surfaces

Cleaning the countertops will eliminate minor stains, but if the surface damage is severe and the debris, soot, and dirt have seeped into the countertop surfaces, cleaning the surfaces won’t cut—you need a tougher way to go about it.

One of these ways is to sand the surfaces. Start with cleaning the surfaces until they are thoroughly clean and free of dirt or debris. You should then choose the right sandpaper depending on the nature of the surfaces.

If the surfaces are heavily scratched or damaged, start with a grit of 60, but if they are a little smoother, you can start with a grit of 120.

You should then wet the surface with a damp cloth to reduce the dust created by sanding.

Once wet, sand the surface in a circular motion while applying light pressure. To prevent the surface from clogging with marble dust, keep the sandpaper wet while you do the sanding.

You should continue sanding until you can no longer see the scratches and damage.

Once you are done, wipe the surface with a damp cloth to remove any remaining dust and debris.

Finally, dry the surface with a soft, dry cloth. If necessary, polish the surface using a marble polishing compound and a soft cloth.

Use an etch remover

If you have tried sanding the countertops but still don’t look as polished as they should, consider using an etch remover to remove the etch marks.

The etches on your countertops can be brought about by several factors, such as using acidic substances on your countertops.

An etch remover is designed to remove these etch marks leaving your countertops looking clean and shiny.

To remove the etches and polish your countertops, you should start by cleaning the surfaces to remove all the dirt and debris.

Following the instructions given on the etch remover, use the right amount of product. Using a clean cloth, you should apply the product on all the etch marks on the countertops.

For the best outcome, rub the etch remover gently on the etch marks in a circular motion. As you do it, take care not to use too much pressure that can lead to damage to the counters.

You should let the etch remover sit on the countertops for the recommended time, then rinse it with clean water. Finally, dry the countertops with a soft, dry cloth and if necessary, apply countertop polish.

Parting shot

These are some of the ways in which you can restore the dull on your marble kitchen countertops NC. You can do the polishing yourself, but let an expert do the work for the best outcome.