Marble worktops add classic elegance to any bathroom or kitchen. However, it’s not given that you will have a great time with your marble countertops just because you have installed them. You need to do way more than that.

To help you out, here are crucial marble hacks that will ensure that you have a great time with your surfaces:

Stick with white marble to avoid stains

Even though many people instantly think of creamy, white stone when they think of marble, you should note that there are hundreds of varieties, including taupe, green, gold, red, and black varieties.

Although there are plenty of options, when it comes to marble kitchen countertops, you should stick with white marble. Acid etching is significantly more obvious on colorful marble than on white marble. After all, it produces a pale mark.

Any dark or non-white marble used for kitchen countertops is subject to a thousand problems and you don’t want to deal with them, do you?

Think about veining during the installation.

Every quarry is different, but certain types of marble blocks can be cut in two distinct ways to generate unique veining patterns. Crosscut, or fleuri cut, produces stone slabs with an open flowered pattern, which seems quite random and is great for book-matching.

Vein cut, or striate, slices the block in the opposite direction to create a linear, striped appearance.

For a long time, designers have used both cuts to produce some stunning ensembles. They may make vein cuts on the wall and cross cuts on the floor.

For a great experience, pay attention to the veining of the countertops and ensure that you work with your installation professional to have them professionally matched and installed.

Use a pH-neutral cleaner.

Marble is a natural stone susceptible to acidic liquids, which can cause etching or dull patches on its surface. For a great experience, using a pH-neutral cleaner made exclusively for natural stone is critical.

Household cleaners, such as vinegar, lemon juice, or bleach, can dissolve the marble’s surface, causing lasting harm. And you don’t want this, do you?

For daily cleaning, always use a soft cloth or sponge. Abrasive scrubber projects can damage your marble countertops’ surface. A microfiber cloth is ideal for cleaning marble surfaces because it eliminates dirt and debris without causing damage.

To avoid watermarks, gently wipe the surface with a damp cloth and then dry it with a clean towel.

Try out different finishes.

The entire stone industry has been experiencing a massive wave of technology, which is transforming the product. This means there are now more options than ever to finish your stone, including various brushing and polishing procedures.

This means you can find a wide range of finishing options, including orange-peel-like texture that could be referred to as a “leather, brushed, or river-wash finish.

While this is the case, you should note that the most popular options remain polished (glossy) or honed (matte). If you are worried about acid etching, you should go for a honed finish.

Etching will dull a polished finish and make it more visible, and you don’t want this. With honed, you’re dulling an already dull finish, so it disguises it, leaving your countertops looking great for a long time.

Curve the edges of your countertops.

Aside from its natural beauty, there’s a reason marble has historically been so popular for sculpture: it’s simple to work with tools. When you add sophisticated computer numerical control milling machines to the mix, practically anything is conceivable for kitchen design.

There are numerous edge profiles to choose from, but for a great experience go for a simple eased edge, which takes the sharpness off a straight 90-degree corner.

A bull’s nose, which has the profile of a half circle, is also a timeless option that you should highly consider. You should remember that hard stones like marble are brittle, so they will chip if you hit a 90-degree corner with something hard.

The good thing is that using a miter junction at the edge of the countertop might give a thin 3/4-inch stone the illusion of a thicker slab. You can build up a nice, thick-looking piece without having to use a thick slab.

You can also engrave a pattern of your choice on the edge of a white marble countertop to create marble tables with a carved brogue pattern.

While this is the case, the best way to deal with marble countertops is to accept that they may patina over time. If you’ve been to an old bakery or pizza shop and seen how white marble patinas are and like it, then it could be the perfect material for you.

Always know the source of the marble.

Because white marble, such as Calacatta and Statuario, is so popular around the world, some marble suppliers will call their veined white marble Calacatta marble. However, this will not be authentic; instead, it will be just white stone with veins from China or elsewhere.

True Calacatta comes from mountain quarries in Carrara, Italy, and True Statuario marble comes from Italy. If you’re at a showroom and the sellers are selling something called Carrara marble or Carrara white, it’s worth checking the stone’s origins to ensure that you are buying high-quality and genuine stone.

Parting shot

These are some of the hacks that you should implement to have a great time with your marble countertops. When you install bathroom or kitchen countertops Raleigh, always remember to seal the countertops.

This is because these countertops are highly porous, and using them in their unsealed state risks damaging them.

To be safe, use a high-quality sealing product that will not only protect the surfaces but also ensure that they last a long time.

Also, remember to have the surfaces sealed by a professional who knows what they are doing. This way, you are safe, as you know that the countertop sealing agent will give you the service you are after and last for a long time.